Spatial Precipitation Assessment with Elevation by Using Point Cumulative Semivariogram Technique

Depiction of precipitation change by elevation in an areaindicates the possibilities of orographic rainfall occurrencesin the mountainous regions. In general, precipitation increaseswith elevation but sometimes inverse cases occur locally due toorographic and meteorological features of the area. Inpractice, prior to any quantitative modeling, qualitativeassessments and interpretations help to have sound foundationsin search for a suitable model. In this article, standardizedpoint cumulative semivariogram (SPCSV) methodology is employedfor identification of the precipitation-elevationrelationship. According to relative positions of theprecipitation and elevation SPCSVs four different precipitationcategories are suggested. The application of the methodologyproposed is presented for the precipitation records from YuccaMountain, Nevada, U.S.A.     

Determination of flavan-3-ols and trans-resveratrol in grapes and wine using HPLC with fluorescence detection

Concentrations of trans-resveratrol, catechin and epicatechin were analyzed in musts and wines produced from seven red and four white grape cultivars from various wine growing regions of Turkey. Phenolics were quantified using an HPLC method optimized for the separation of wine phenolics. Wine samples contained higher phenolics levels than the corresponding musts. With the exception of Semillion, white wines and musts contained lower concentrations of phenolics than red wines and musts. However, the white cultivar Semillion had the highest concentrations of catechin and epicatechin among all wine and must samples. Semillion wine catechin and epicatechin were 13.7 and 11.8 mg/L, respectively. The highest level of trans-resveratrol among the white cultivars was found in Narince wine (1.93 mg/L). Within the red wine and must cultivars, Bo?azkere, Öküzgozü, and Cabernet contained the highest concentrations of flavan-3-ols and trans-resveratrol. Catechin was the major phenolic in all wines and most musts. Epicatechin was the major phenolic in 6 of the 11 must samples, but none of the wine samples. trans-Resveratrol was generally found in lowest concentrations in both wines and musts.     

Analysis of ISE in dynamic hardness measurements of β-Sn single crystals using a depth-sensing indentation technique

The dynamic indentation tests on (001) plane β-Sn single crystals having different growth directions under different peak indentation test load (10, 20, 30, 40, and 50 mN) has been investigated. The experimental results reveal that the measured hardness values exhibit a peak-load dependence, i.e., indentation size effect (ISE). Such peak-load dependence is then analyzed using the Meyer's law, the Hays–Kendall's approach, the Elastic/Plastic Deformation model, the Proportional Specimen Resistance (PSR) model, and the Modified PSR (MPSR) model. As a result, Modified PSR model is found to be the most effective for dynamic hardness determination of β-Sn single crystals.     

Poly(ether sulfonamide)s with glycidyl pendant units

SUMMARY High molecular weight poly (ether sulfonamide) has been prepared by condensation of 4,4'-dichlorosulfonyldiphenylether with ethylenediamine. The reaction of potassium salt of poly (ether sulfonamide) with epichlorohydrin gives the corresponding N-glycidiyl derivative in yield as high as 98%. The resulting polymer offers many functionalization possibilities through ring opening of the oxirane units. Also the glycidiyl bearing polymer may act as multifunctional post-crosslinking agent for polymers carrying hydroxy, amino or carboxyl groups. Received: 16 February 1998/Revised version: 4 May 1998/Accepted: 7 May 1998     

Equilibrium and kinetic isotherms and parameters for molecularly imprinted with sclareol poly(acrylonitrile‐co‐acrylic acid) matrix

The present work continues the previous studies concerning the synthesis and characterization of molecularly imprinted polymers (MIPs) with sclareol as template and three poly(acrylonitrile‐co‐acrylic acid) (AN:AA) copolymers with different ratios between monomers as matrices. The previous studies of rheology, elemental analysis, infrared spectroscopy, size exclusion chromatography, thermogravimetry, differential scanning calorimetry, batch rebinding tests, and Scatchard analysis, which confirmed the molecular imprinting, are being completed with the current equilibrium and kinetic adsorption studies. For this purpose, eight adsorption isotherms and three kinetic adsorption models were applied to six sets of experimental data obtained after three sclareol‐imprinted adsorbents (MIPs) and three nonimprinted adsorbents (NIPs) were submitted to batch adsorption experiments. After ordering the adsorption models according to the “minimum sum of normalized errors (SNE)” criteria, it was concluded that the adsorption in sclareol imprinted AN:AA copolymers is characterized by low surface coverage, takes place on heterogeneous binding sites and is reversible, while for NIPs the results suggest a difficult adsorption and/or easiness of template extraction, and that NIPs have homogeneous, but nonimprinted micropores. For the kinetic experiments, the minimum SNE for MIPs points to the first order kinetic model, fact that suggests a physical adsorption of template molecules on the imprinted sites. POLYM. ENG. SCI., 55:1152–1162, 2015. © 2014 Society of Plastics Engineers     

Synthesis and characterization of a Zr‐containing silicate‐based epoxy‐functional polymer nanocomposite system

As a continuation of efforts to explore the potential of certain types of polymer nanocomposites to be successful candidates as dental restoration/adhesion materials, a Zr‐containing and organically modified silicate‐based material system with epoxy functionality was prepared by use of a sol–gel synthesis method, and UV light‐ and visible light (VL)‐curing processes. Comparative influences of the synthesis and processing parameters on the mechanical, thermal, and microstructural/nanostructural properties of the system were detailed. Zr‐containing species proved to more effectively catalyze the epoxy polymerization/crosslinking reactions than those containing Ti. Incorporation of Zr into the nanocomposite network led to significantly advanced mechanical properties. An elastic (Young's) modulus value of 23 MPa was achieved. The system with relatively high Zr content was successfully obtained, which also had higher thermal stability. Overall observations and results suggested that Zr content, and the UV light‐ or VL‐curing process could be capitalized on to modify the structure, and to improve the final properties of these material systems, which indicated a prospective opportunity for this material system to be utilized in dental restoration/adhesion applications. POLYM. ENG. SCI., 55:792–798, 2015. © 2014 Society of Plastics Engineers     

Crossflow filtration of iron(III), copper(II), and cadmium(II) aqueous solutions with alginic acid/cellulose composite membranes

The removal of Fe(III), Cu(II), and Cd(II) ions from aqueous solutions was investigated with a crossflow filtration technique. Alginic acid (AA)/cellulose composite membranes were used for retention. In the filtration of Fe(III) solutions, the effects of the crossflow velocity, applied pressure, AA content of the membranes, and pH on the retention percentage and the permeate flux were examined. The maximum retention percentage was found to be 89% for a 1 × 10^?4M Fe(III) solution at the flow velocity of 100 mL/min and the pressure of 60 kPa with 0.50% (w/v) AA/cellulose composite membranes at pH 3. Aqueous solutions of Cu(II) and Cd(II) were filtered at the flow velocity of 100 mL/min and pressure of 10 kPa. The effects of the AA content of the membranes and pH of the waste medium on the retention percentage and the permeate flux were determined. For 1 × 10^?4M Cu(II) and Cd(II) solutions, the maximum retention percentages were found to be 94 and 75%, respectively, at pH 7 with 0.50% (w/v) AA/cellulose composite membranes. When metal‐ion mixtures were used, the retention percentages of Fe(III), Cu(II), and Cd(II) were found to be 89, 48, and 10%, respectively, at pH 3 with 0.50% (w/v) AA/cellulose composite membranes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Electrical characterization of the boron trifluoride doped poly(3‐aminoacetophenone)/p‐Si junction

Electrical and interface state properties of the borontrifluoride doped poly(3‐aminoacetophenone)/p‐Si junction have been investigated by current‐voltage and impedance spectroscopy methods. Al/p‐Si/P₃APBF₃/Aldiode indicates a nonideal behavior with electrical parameters (n = 3.53, ?_B = 0.82 eV, and R_s = 1.48 kΩ), which result from the interfacial layer, series resistance, and resistance of the organic semiconductor. The obtained barrier height value of the Al/p‐Si/P₃APBF₃/Aldiode is higher than that of the conventional Al/p‐Si (?_B = 0.58 eV) Schottky diode. The interface state density of the diode was of the order of 1.05× 10¹² eV^?1 cm^?2. It is evaluated that the barrier height and interface state density values of the diode are modified using the boron trifluoride doped poly (3‐aminoacetophenone) organic semiconductor. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers